Large diameter solid hardwood pendant lamp cable hooks with concealed fixing, handmade custom floating wall hook lamp cable holder
from £12.00
Wall mounted large diameter solid hardwood pendant lamp cable hooks and concealed fixings,
These hooks are made from FSC sourced hardwood timbers which has been turned to 38/40mm in diameter. This large diameter allows for longer hooks, large lamp fixing to hung securely and give a more visible impact. The hooks have a rounded groove has been cut at both ends about 12mm from the edge. These groves allows the pendant lamp cable to be easily secured into position and wrapped around the hook to get the exact length required.
Dimensions are
Medium: 12cm x D:38mm
Long: 18cm x D:38mm
XL: 24cm x D:38mm
XXL: 30cm x D:38mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
If you require a smaller diameter hook they can be found here https://thejourneymanandco.etsy.com/listing/1509139754
These hooks are made from FSC sourced hardwood timbers which has been turned to 38/40mm in diameter. This large diameter allows for longer hooks, large lamp fixing to hung securely and give a more visible impact. The hooks have a rounded groove has been cut at both ends about 12mm from the edge. These groves allows the pendant lamp cable to be easily secured into position and wrapped around the hook to get the exact length required.
Dimensions are
Medium: 12cm x D:38mm
Long: 18cm x D:38mm
XL: 24cm x D:38mm
XXL: 30cm x D:38mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
If you require a smaller diameter hook they can be found here https://thejourneymanandco.etsy.com/listing/1509139754
Timber:
Style:
Quantity:
Wall mounted large diameter solid hardwood pendant lamp cable hooks and concealed fixings,
These hooks are made from FSC sourced hardwood timbers which has been turned to 38/40mm in diameter. This large diameter allows for longer hooks, large lamp fixing to hung securely and give a more visible impact. The hooks have a rounded groove has been cut at both ends about 12mm from the edge. These groves allows the pendant lamp cable to be easily secured into position and wrapped around the hook to get the exact length required.
Dimensions are
Medium: 12cm x D:38mm
Long: 18cm x D:38mm
XL: 24cm x D:38mm
XXL: 30cm x D:38mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
If you require a smaller diameter hook they can be found here https://thejourneymanandco.etsy.com/listing/1509139754
These hooks are made from FSC sourced hardwood timbers which has been turned to 38/40mm in diameter. This large diameter allows for longer hooks, large lamp fixing to hung securely and give a more visible impact. The hooks have a rounded groove has been cut at both ends about 12mm from the edge. These groves allows the pendant lamp cable to be easily secured into position and wrapped around the hook to get the exact length required.
Dimensions are
Medium: 12cm x D:38mm
Long: 18cm x D:38mm
XL: 24cm x D:38mm
XXL: 30cm x D:38mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
If you require a smaller diameter hook they can be found here https://thejourneymanandco.etsy.com/listing/1509139754
Wall mounted large diameter solid hardwood pendant lamp cable hooks and concealed fixings,
These hooks are made from FSC sourced hardwood timbers which has been turned to 38/40mm in diameter. This large diameter allows for longer hooks, large lamp fixing to hung securely and give a more visible impact. The hooks have a rounded groove has been cut at both ends about 12mm from the edge. These groves allows the pendant lamp cable to be easily secured into position and wrapped around the hook to get the exact length required.
Dimensions are
Medium: 12cm x D:38mm
Long: 18cm x D:38mm
XL: 24cm x D:38mm
XXL: 30cm x D:38mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
If you require a smaller diameter hook they can be found here https://thejourneymanandco.etsy.com/listing/1509139754
These hooks are made from FSC sourced hardwood timbers which has been turned to 38/40mm in diameter. This large diameter allows for longer hooks, large lamp fixing to hung securely and give a more visible impact. The hooks have a rounded groove has been cut at both ends about 12mm from the edge. These groves allows the pendant lamp cable to be easily secured into position and wrapped around the hook to get the exact length required.
Dimensions are
Medium: 12cm x D:38mm
Long: 18cm x D:38mm
XL: 24cm x D:38mm
XXL: 30cm x D:38mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
If you require a smaller diameter hook they can be found here https://thejourneymanandco.etsy.com/listing/1509139754
