Large oak wall mounted round peg coats hooks with concealed fixings and handpainted tips,
from £6.00
Handmade over sized solid oak coat hooks.
These hooks can be made solid European oak they are between 38-42mm thick. These hooks are suitable for heavier items and make more of an impact in a space due to their size.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
They are available in these lengths (I can make they to other sizes on request):
Short: L:6.5cm
Medium L:12cm
Long L: 18cm
Extra Long L:24cm
The wall hooks can come painted or unfinished, If multiple hooks ordered I will aim to match the timber type.
Note: the listing is for single hook.
These hooks can be made solid European oak they are between 38-42mm thick. These hooks are suitable for heavier items and make more of an impact in a space due to their size.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
They are available in these lengths (I can make they to other sizes on request):
Short: L:6.5cm
Medium L:12cm
Long L: 18cm
Extra Long L:24cm
The wall hooks can come painted or unfinished, If multiple hooks ordered I will aim to match the timber type.
Note: the listing is for single hook.
Secondary color:
Style:
Quantity:
Handmade over sized solid oak coat hooks.
These hooks can be made solid European oak they are between 38-42mm thick. These hooks are suitable for heavier items and make more of an impact in a space due to their size.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
They are available in these lengths (I can make they to other sizes on request):
Short: L:6.5cm
Medium L:12cm
Long L: 18cm
Extra Long L:24cm
The wall hooks can come painted or unfinished, If multiple hooks ordered I will aim to match the timber type.
Note: the listing is for single hook.
These hooks can be made solid European oak they are between 38-42mm thick. These hooks are suitable for heavier items and make more of an impact in a space due to their size.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
They are available in these lengths (I can make they to other sizes on request):
Short: L:6.5cm
Medium L:12cm
Long L: 18cm
Extra Long L:24cm
The wall hooks can come painted or unfinished, If multiple hooks ordered I will aim to match the timber type.
Note: the listing is for single hook.
Handmade over sized solid oak coat hooks.
These hooks can be made solid European oak they are between 38-42mm thick. These hooks are suitable for heavier items and make more of an impact in a space due to their size.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
They are available in these lengths (I can make they to other sizes on request):
Short: L:6.5cm
Medium L:12cm
Long L: 18cm
Extra Long L:24cm
The wall hooks can come painted or unfinished, If multiple hooks ordered I will aim to match the timber type.
Note: the listing is for single hook.
These hooks can be made solid European oak they are between 38-42mm thick. These hooks are suitable for heavier items and make more of an impact in a space due to their size.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
They are available in these lengths (I can make they to other sizes on request):
Short: L:6.5cm
Medium L:12cm
Long L: 18cm
Extra Long L:24cm
The wall hooks can come painted or unfinished, If multiple hooks ordered I will aim to match the timber type.
Note: the listing is for single hook.
