Handmade square hardwood wall mounted coat hook pegs with concealed fixings and hand painted tips
from £4.20
Square solid Oak coat hook with concealed fixings with optional painted tip. The hook from European Oak and painted in Farrow and Ball paints. The timber grain, texture and colour will vary slightly as they reclaimed materials.
Dimensions are:
Short L : 6.5cm x D:25mm x H:25mm
Medium L: 12cm x D:25mm x H:25mm
Long L:18cm x D:25mm x H:25mm
XL L: 24cm x D:25mm x H:25mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
The hooks can come painted or unfinished, If multiple hooks order I will match the timber colour.
Note the listing is for single hook.
Dimensions are:
Short L : 6.5cm x D:25mm x H:25mm
Medium L: 12cm x D:25mm x H:25mm
Long L:18cm x D:25mm x H:25mm
XL L: 24cm x D:25mm x H:25mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
The hooks can come painted or unfinished, If multiple hooks order I will match the timber colour.
Note the listing is for single hook.
Secondary color:
Style:
Quantity:
Square solid Oak coat hook with concealed fixings with optional painted tip. The hook from European Oak and painted in Farrow and Ball paints. The timber grain, texture and colour will vary slightly as they reclaimed materials.
Dimensions are:
Short L : 6.5cm x D:25mm x H:25mm
Medium L: 12cm x D:25mm x H:25mm
Long L:18cm x D:25mm x H:25mm
XL L: 24cm x D:25mm x H:25mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
The hooks can come painted or unfinished, If multiple hooks order I will match the timber colour.
Note the listing is for single hook.
Dimensions are:
Short L : 6.5cm x D:25mm x H:25mm
Medium L: 12cm x D:25mm x H:25mm
Long L:18cm x D:25mm x H:25mm
XL L: 24cm x D:25mm x H:25mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
The hooks can come painted or unfinished, If multiple hooks order I will match the timber colour.
Note the listing is for single hook.
Square solid Oak coat hook with concealed fixings with optional painted tip. The hook from European Oak and painted in Farrow and Ball paints. The timber grain, texture and colour will vary slightly as they reclaimed materials.
Dimensions are:
Short L : 6.5cm x D:25mm x H:25mm
Medium L: 12cm x D:25mm x H:25mm
Long L:18cm x D:25mm x H:25mm
XL L: 24cm x D:25mm x H:25mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
The hooks can come painted or unfinished, If multiple hooks order I will match the timber colour.
Note the listing is for single hook.
Dimensions are:
Short L : 6.5cm x D:25mm x H:25mm
Medium L: 12cm x D:25mm x H:25mm
Long L:18cm x D:25mm x H:25mm
XL L: 24cm x D:25mm x H:25mm
Angled or straight refers to how the hooks position against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
The hooks can come painted or unfinished, If multiple hooks order I will match the timber colour.
Note the listing is for single hook.
