Handmade double grooved wall mounted solid hardwood pendant lamp cable hook with concealed fixing available in a range of timbers and sizes
from £9.00
These custom made hooks are made from FSC sourced hardwoods which have been turned to 30/32mm in diameter and then a rounded groove is cut 12mm from the edge at both ends. These groves allows pendant lamp cables to be easily secured into position and wrapped around the hook to achieve the exact length required.
Dimensions are:
Medium: 12cm x D:30cm
Long: 18cm x D:30mm
Long XL: 24cm x D:30mm
Angled or straight options refers to how the hook is positioned against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
if you require a larger diameter timber hook you can find them here https://www.etsy.com/uk/listing/1717334019/large-diameter-solid-hardwood-pendant
The timber grain, texture and colour may vary slightly as some are reclaimed. If you require a specific, length, finish or timber please let me know and I'll let you know what I have available.
Dimensions are:
Medium: 12cm x D:30cm
Long: 18cm x D:30mm
Long XL: 24cm x D:30mm
Angled or straight options refers to how the hook is positioned against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
if you require a larger diameter timber hook you can find them here https://www.etsy.com/uk/listing/1717334019/large-diameter-solid-hardwood-pendant
The timber grain, texture and colour may vary slightly as some are reclaimed. If you require a specific, length, finish or timber please let me know and I'll let you know what I have available.
Timber:
Style:
Quantity:
These custom made hooks are made from FSC sourced hardwoods which have been turned to 30/32mm in diameter and then a rounded groove is cut 12mm from the edge at both ends. These groves allows pendant lamp cables to be easily secured into position and wrapped around the hook to achieve the exact length required.
Dimensions are:
Medium: 12cm x D:30cm
Long: 18cm x D:30mm
Long XL: 24cm x D:30mm
Angled or straight options refers to how the hook is positioned against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
if you require a larger diameter timber hook you can find them here https://www.etsy.com/uk/listing/1717334019/large-diameter-solid-hardwood-pendant
The timber grain, texture and colour may vary slightly as some are reclaimed. If you require a specific, length, finish or timber please let me know and I'll let you know what I have available.
Dimensions are:
Medium: 12cm x D:30cm
Long: 18cm x D:30mm
Long XL: 24cm x D:30mm
Angled or straight options refers to how the hook is positioned against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
if you require a larger diameter timber hook you can find them here https://www.etsy.com/uk/listing/1717334019/large-diameter-solid-hardwood-pendant
The timber grain, texture and colour may vary slightly as some are reclaimed. If you require a specific, length, finish or timber please let me know and I'll let you know what I have available.
These custom made hooks are made from FSC sourced hardwoods which have been turned to 30/32mm in diameter and then a rounded groove is cut 12mm from the edge at both ends. These groves allows pendant lamp cables to be easily secured into position and wrapped around the hook to achieve the exact length required.
Dimensions are:
Medium: 12cm x D:30cm
Long: 18cm x D:30mm
Long XL: 24cm x D:30mm
Angled or straight options refers to how the hook is positioned against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
if you require a larger diameter timber hook you can find them here https://www.etsy.com/uk/listing/1717334019/large-diameter-solid-hardwood-pendant
The timber grain, texture and colour may vary slightly as some are reclaimed. If you require a specific, length, finish or timber please let me know and I'll let you know what I have available.
Dimensions are:
Medium: 12cm x D:30cm
Long: 18cm x D:30mm
Long XL: 24cm x D:30mm
Angled or straight options refers to how the hook is positioned against the wall.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
if you require a larger diameter timber hook you can find them here https://www.etsy.com/uk/listing/1717334019/large-diameter-solid-hardwood-pendant
The timber grain, texture and colour may vary slightly as some are reclaimed. If you require a specific, length, finish or timber please let me know and I'll let you know what I have available.
